The use of other network devices connected between the IP Cameras and the main unit is not supported. NOTE: If you have NVR IP cameras that are located more than 370ft/100m in distance from the main unit, it is suggested to power them at the final location.Try connecting the camera to a different power supply at night to see if the camera image is corrected. If you are experiencing video loss, flickering lines or fuzzy images on one or more cameras at night, this may be the result of a faulty camera power supply. Try connecting the recorder to another HDMI input or a 2 nd TV/Monitor.Try replacing the HDMI cable, to see if you have a faulty cable.Ensure you are tuned to the right HDMI input if your TV/Monitor has more than one.Ensure the HDMI cable is connected from the recorder to your TV/Monitor.If not, please connect the recorder to a TV/Monitor that is. Ensure your TV/Monitor is a minimum of 1080p resolution.If you cannot see any cameras or the recorder menu on your TV/monitor, please: If your recorder is powered on, but you cannot see one or more connected cameras on your TV/Monitor or Smart Device, try the steps below.Ĭannot See the Recorder on Your TV/Monitor If you are still under warranty, please contact us to open a warranty claim and receive a new power supply. If the recorder powers on, then you may have a faulty recorder power adapter. Disconnect the recorder power adapter and replace it with a power adapter of the same amperage.Look for signs of melting and/or a burning smell.Check for any physical damage to the power adapter.Ensure you are using the power adapter that came with the recorder.Check to see if the recorder’s power adapter has gone bad. NOTE: Not all recorders have a power switch.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |